网站首頁   GB 中國國家標準檢索   GB標準關鍵詞 特價英文版GB標準   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB 25431.1-2010
橡膠塑膠擠出機和擠出生產線 第1部分:擠出機的安全要求(中英文版)
Extruders and extrusion lines for rubber and plastics - Part 1: Safety requirements for extruders
GB/T 9695.18-2008
肉與肉製品 總灰分測定(中英文版)
Meat and meat products - Determination of total ash
JJF 1536-2015
捷聯式慣性航姿儀校準規範(中英文版)
Calibration Specification for Strapdown Intertial Flight Attitudes
SJ/T 10056-1991
電子器件詳細規範 2cz59型管殼額定矽整流二極體(中英文版)
Detail specification for electronic components. Case rated silicon rectifier diode, Type 2CZ59
GB/T 14146-2009
矽外延層載流子濃度測定 汞探針電容-電壓法(中英文版)
Silicon epitaxial layers-determination of carrier concentration-mercury probe voltages-capacitance method
FZ/T 52039-2014
再生聚苯硫醚短纖維(中英文版)
Recycled polyphenylene sulfide staple fiber
TB/T 2226-2016
鐵道客車用集中軸溫報警器(中英文版)
(Centralized Temperature Alarm for Railway Passenger Cars)
GB/T 2900.82-2008
電工術語 核儀器 儀器、系統、設備和探測器(中英文版)
Electrotechnical terminology - Nuclear instrumentation - Instruments, systems,equipment and detectors
JJG 239-1994
二、三等標準活塞式壓力真空計(中英文版)
Standard Piston Pressurevacuum Gauge (Grade II and III)
NB/T 20009.10-2013
壓水堆核電廠用焊接材料 第10部分:1級設備埋弧焊用低合金鋼焊絲和焊劑(中英文版)
Welding materials for pressurized water reactor nuclear power plants. Part 10: Low alloy steelwelding wire and flux for submerged arc welding of class 1 components
SJ/T 10811-1996
電子器件詳細規範 半導體積體電路ct1008型ttl四2輸入反及閘(可供認證用)(中英文版)
Detailed specifications for electronic components - Semiconductor integrated circuits - CT1008 TTL Quad 2-input positive-NAND gate (Applicable for certification)
HG/T 5088-2016
有機矽洗衣粉消泡劑(中英文版)
(Silicone detergent powder defoamer)
TB/T 2566-1995
機車牽引齒輪滲碳、淬火、回火強化技術條件(中英文版)
(Traction gear carburizing, quenching, tempering strengthen technical conditions)
GB/T 4615-2013
聚氯乙烯 殘留氯乙烯單體的測定 氣相色譜法(中英文版)
Poly(vinyl chloride) - Determination of residual vinyl chloride monomer gas-chromatographic method
HG/T 3217-2009
搪玻璃上展式放料閥(中英文版)
Glass lined-life up vales
GB/T 39640-2020
家用電器及類似器具電磁場相對於人體曝露的測量方法(中英文版)
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
GB/T 19466.6-2009
塑膠 差示掃描量熱法(DSC)第6部分:氧化誘導時間(等溫OIT)和氧化誘導溫度(動態OIT)的測定(中英文版)
Plastics - Differential scanning calorimetry(DSC)- Part 6: Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT)
YY/T 0640-2008
無源外科植入物通用要求(中英文版)
Non-active surgical implants. General requirements
HG/T 20549.3-1998
化工裝置管道佈置專業技術管理規定(中英文版)
Design Standard Piping Layout for Chemical Plant
GB/T 33014.3-2016
道路車輛 電氣/電子部件對窄帶輻射電磁能的抗擾性試驗方法 第3部分:橫電磁波(TEM)小室法(中英文版)
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 3: Transverse electromagnetic(TEM)cell
GB/T 38732-2020
表面活性劑 工業烷基磺酸鹽試驗方法(中英文版)
Surface active agents—Test methods of technical alkane sulfonates
GB/T 26309-2010
銀蒸發料(中英文版)
Silver evaporation material
CJ/T 241-2007
飲用淨水水錶(中英文版)
Water meter for fine drinking water
GB/T 16484.14-2009
氯化稀土、碳酸輕稀土化學分析方法 第14部分:磷酸根量的測定 銻磷鉬藍分光光度法(中英文版)
Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 14: Determination of phosphorus radical content - Phosphorus-antimonate-molybdenum blue spectrophotometry
GB/T 20897.4-2019
充氣艇 第4部分:發動機額定功率為15 kW及以上且船長在8m~24m之間的艇(中英文版)
Inflatable boats—Part 4:Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
GB 28527-2012
家用和類似用途的帶或不帶過電流保護的插座式剩餘電流電器(SRCD)(中英文版)
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
SN/T 3469.4-2014
進口粗煉或燒結銅物料中鉑、鈀含量的測定(中英文版)
(Determination of imported materials copper smelting or sintering of platinum, palladium content)
GB 50369-2014
油氣長輸管道工程施工及驗收規範(中英文版)
Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering
YDC 022-2008
800mhz cdma 1x數位蜂窩移動通信網設備測試方法:基站子系統(中英文版)
Test Specification of Base Station Subsystem (BSS) for 800MHz CDMA 1X Digital Cellular Mobile Telecommunication Network
GB/T 14764-2008
手用鋼鋸條(中英文版)
Hand hacksaw blades
GB/T 36583-2018
外牆外保溫系統抗穿透性測試方法(中英文版)
Determination of the resistance to penetration of external thermal insulation composite systems
JC/T 680-1997
矽鎂加氣混凝土空心輕質隔牆板(中英文版)
Hollow light partition of aerated concrete with silica and magnesium
GB/T 31532-2015
牙膏中丁磺氨鉀和糖精鈉的測定 高效液相色譜法(中英文版)
Determination of acesulfame potassium and sodium saccharin in toothpaste—High performance liquid chromatography
SB/T 10128-1992
饅頭機技術條件(中英文版)
(Bread machine technical conditions)
GB/T 1149.15-2017
內燃機 活塞環 第15部分:薄型鑄鐵螺旋撐簧油環(中英文版)
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
SN/T 1657.5-2014
進出口電動工具檢驗規程 第5部分:掌上型電動木銑和掌上型電動修邊機(中英文版)
(Inspection of import and export electric tools - Part 5: Hand-held electric wood paneling and hand-held electric trimmer)
QB/T 2845-2007
食品添加劑 呈味核苷酸二鈉(中英文版)
Food additive- Disodium 5-inosinate+Diosdium 5-guanylate
SJ 1006-1975
下壓板(中英文版)
Double acting drawing die on press--Down press plate
SY/T 5649-1993
石油傾點試驗器技術條件(中英文版)
(Oil pour point tester technical conditions)
GB/T 2414.2-1998
壓電陶瓷材料性能試驗方法 長條橫向長度伸縮振動模式(中英文版)
Test methods for the properties of piezoelectric ceramics--Transverse length extension vibration mode for bar
DL/T 5122-2000
500kV架空送電線路勘測技術規程(中英文版)
Technical code of exploration and surveying for 500kV overhead transmission line
GB/T 19290.7-2021
發展中的電子設備構體機械結構模數序列 第2-5部分:分規範 25 mm設備構體的介面協調尺寸 各種設備用機櫃介面尺寸(中英文版)
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5:Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabine tinterface dimensions for miscellaneous equipment
QB/T 1299-2011
口琴(中英文版)
Harmonica
GB/T 7397.5-2000
非廣播磁帶錄影機測量方法 第5部分:寬頻錄影機----包括具有Y/C視頻連接器的寬頻錄影機(PAL/NTSC)(中英文版)
Non-broadcast video tape recorders--Methods of measurement--Part 5:High-band video tape recorders including those equipped with Y/C video connectors (PAL/NTSC)
QC/T 61-2008
摩托車和輕便摩托車發動機強化試驗技術要求及試驗方法(中英文版)
Specifications and test methods on intensifying test of engine of motorcycles and mopeds
SN 0084-1992
出口生狗絨皮檢驗方法(中英文版)
Method for inspection of raw pluckedgoupee skin for export
GB/T 20506-2006
鋁及鋁合金陽極氧化 陽極氧化膜表面反射特性的測定 遮光角度儀或角度儀法(中英文版)
Anodizing of aluminium and its alloys - Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
JT/T 5036.1-1993
內河港口固定起重機、台架起重機基本參數系列(中英文版)
(Inland ports fixed cranes, gantry cranes basic parameters Series)
SJ 2936-1988
中功率計技術條件(中英文版)
Specification for medium powers wattmeters
FZ/T 54093-2017
彈性滌綸牽伸絲/滌綸預取向絲(edy/poy)混纖絲(中英文版)
(Elastic polyester stretch yarn/polyester pre-oriented wire (EDY/POY) mixed fiber)

找到:115477條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [368] [369] [370] [371] [372] [373] [374]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2025  RJS MedTech Inc. All Rights Reserved